Galleries > Tattoo Machines

Machine/Ordering Information

I am now offering two standard machine models (Tripod DD and Fat Bottom DD) to help make my process a little smoother. They both have a high torque Japanese motor that will line, shade, color, and/or stipple all by simply adjusting the voltage on your power supply. They also come with a standard 4mm throw so you can use as much or as little of the needle as you need and will move up to a 45 mag easily. Works with all standard tubes and will push cartridge needles.

All machines come with a 1 year limited warranty.

No returns.

You can see my available hand made tattoo machines on my Instagram account. @ancientirons

To place an order for a machine you can click here.

Machine troubleshooting

If you are experiencing trouble with your machine please follow these steps before sending it back for inspection:

1. Check the cam set screw closest to the motor shaft. Make sure it is nice and tight. If it has loosened up a bit it can still make the cam spin but will not get enough torque to work properly.

2. Check the cam bearing set screw and make sure it's not too tight. It should be nice and snug, not tight. If this screw is too tight it will keep the bearing from spinning properly and will slow down/bog down the machine and will not work properly.

If neither one of these steps solves the issue you are having, please contact me so I can take care of it.


-Alfredo Matta